| |

Cannabis Feeding Fundamentals

ByBC

One of the most commonly asked questions we receive is about the best watering method for cannabis in coco. Our recommendation is feeding cannabis plants multiple times a day as the preferred approach. However, determining the appropriate amount of water, frequency, and key considerations can be challenging. That’s why we have prepared this comprehensive coco watering guide to address all your questions regarding feeding multiple times a day and watering cannabis in coco.

In this guide, you will find specific advice on the ideal water quantity for each watering event. We will also discuss how to determine the appropriate frequency for watering coco coir. Additionally, we provide a coco coir watering schedule to assist you in establishing the timing for multiple daily fertigation events.

By following this guide, you will gain a thorough understanding of the best practices for feeding cannabis plants grown in coco. It will enable you to optimize your watering routine, ensuring the ideal conditions for your plants’ growth and development.

420 Grow Help’s Guide to Feed and Water Cannabis in Coco

This article is part two of 420 Grow Helps’s Guide to Feeding and Watering Cannabis in Coco. Read the complete series!

The Importance of Proper Feeding in Coco Growing

When watering plants in coco, it is essential to always include nutrients in the water. This technique is known as fertigation, which simply means combining fertilizers with irrigation water when feeding cannabis plants. Feeding is the process of delivering fertigated nutrient solutions; A well-executed fertigation and feeding strategy is key to achieving optimal results in your coco grow. In the guide titled “Cannabis Feeding Fundamentals.” I outline five fundamental guidelines that drive this approach. This comprehensive guide provides practical instructions on how to implement these guidelines effectively.

Guideline 1: Fertigation Requires a Delicate Balance

Within the cannabis cultivation community, there often exists a significant level of confusion regarding the interplay between plants, water, and nutrients. It is crucial to grasp that, despite combining nutrients with water, plants absorb them independently. Water is drawn through root membranes via osmosis, while nutrients enter the plant separately through various mechanisms, including diffusion, passive transport, and active transport. These distinct processes govern how the plant receives water and nutrients, necessitating a meticulous balance between the two when feeding cannabis plants.

Osmosis and Electrical Conductivity (EC)

Water absorption in plants occurs through osmosis, a process where the plant generates sugars in its roots to draw in water. However, the effectiveness of osmosis depends on the salinity of the nutrient solution. If the water contains high salt levels, the plant needs to produce more sugars to facilitate water absorption. While plants can adapt to some extent, excessive saltiness can reverse osmosis, causing the plant to lose water.

The nutrients we add to the water are essentially different forms of salts. Excessive nutrient salts in the water can increase its salinity, hindering the plant’s ability to absorb water through osmosis. This is why it’s crucial to be cautious about the total nutrient dose applied. We limit nutrient levels not due to the risk of nutrient toxicity, but primarily to maintain optimal osmosis conditions.

Electrical Conductivity (EC) is a measurement of water salinity, with EC, PPM, and TDS serving as interchangeable ways to express this measurement. You can find a comprehensive explanation of EC, PPM, and TDS in our article titled “Understanding Electrical Conductivity (EC) and Osmosis.” Additionally, explore our tutorials on “Setting EC Targets” and “Managing EC Using Run-off.”

Feeding Cannabis and the Nutrient Element Ratio (NER)

For optimal growth, feeding cannabis plants requires nutrients in the correct Nutrient Element Ratio (NER) at each growth stage. Cannabis feed charts typically adjust the nutrient element ratio throughout the plant’s life cycle. Adhering to these feed charts ensures the plant receives the appropriate NER for its development. High-quality hydroponic nutrients can provide the required nutrients in suitable proportions while maintaining a reasonable total EC. Delve into our article “Cannabis Fertilizers, Supplements, and pH” for further insights.

Balancing Osmosis (EC) and Nutrition (NER)

Preparing nutrient solutions for feeding cannabis plants involves following feed chart guidelines to achieve the correct NER. Achieving the right NER is crucial for plant nutrition. After mixing the solution, it’s essential to verify that the overall mixture’s salinity is within the plant’s tolerance. This is accomplished by measuring the EC. The correct EC is significant as it directly influences osmosis. Consult our tutorial “How to Mix Nutrient Solutions for Cannabis” for comprehensive guidance.

Maintaining a balance between EC and NER when feeding cannabis plants ensures that fertigation meets the plant’s water requirements while delivering nutrients in the most readily absorbable form. With balanced EC and NER, the plant has continuous access to all essential elements in the correct ratios, promoting robust growth.

To sustain this equilibrium, nutrients must be added to all irrigation water at the prescribed ratios and doses. The feed chart dictates the proportion of each nutrient, while EC determines the total amount. As the plant absorbs water and nutrients, both EC and NER may fluctuate. Implementing high-frequency fertigation helps prevent significant deviations from the ideal conditions.

The following four fertigation principles focus on specific practices to uphold the EC/NER balance and create an optimal growth environment for your cannabis plant.

Guideline 2: Always Add Fertilizers to the Water

Many guides recommend alternating nutrient solution with “plain”, “pHed”, or “CalMag” water. Although this may help prevent over-ambitious growers from burning their plants, it is not the correct practice to follow in a carefully managed grow. For a variety of reasons, it is much better to fertigate with the appropriate ratio and strength of nutrition at every irrigation event.

Feeding Cannabis Plants in Coco

Plants require nutrients to fuel the process of photosynthesis and foster growth. In soilless media like coco, plants derive nutrients directly from the water source. Thus, for proper plant nourishment to occur, nutrients must be present in the irrigation water. Buffered coco is particularly advantageous as it does not interfere with nutrient availability. As a grower, you can precisely regulate the nutrients accessible to your plants by providing the appropriate nutrient ratio during each feeding.

For comprehensive insights into fertilizers for cultivating cannabis in coco, we recommend perusing our articles on:

Consistent EC Yields Optimal Growth

In addition to nourishing the plant, administering fertilizer with each irrigation session is the sole method for maintaining a steady electrical conductivity (EC) in the root zone. Plants thrive when the EC of the root zone water falls within the appropriate range and remains stable. Conversely, fluctuations in EC demand constant adjustments from plants, diverting energy and resources away from growth.

As previously explained, plants employ osmosis to draw water from the growing medium into their roots. To facilitate this water absorption, plants must maintain a root sugar concentration higher than the EC of the nutrient solution. When roots are exposed to alternating irrigations featuring nutrient solution and “plain” water, they must cope with a continually shifting EC. Consequently, plants are compelled to make constant adaptations, consuming energy that would otherwise be directed toward growth. Coco cultivation offers the advantage of maintaining a consistent root zone EC with relative ease. Simply provide nutrient solutions with the appropriate EC every time you water your plants to achieve this stability.

To maintain the balance between NER and EC, it is of utmost importance to consistently include nutrients in all irrigation water at the prescribed ratios and quantities. The feed chart outlines the proper nutrient ratio, while the EC measurement dictates the precise amount required. For comprehensive guidelines, please consult our resource on “How to Mix Nutrient Solutions“.

Guideline 3: Maintain Adequate Moisture Levels in Coco

It’s essential to recognize that coco is distinct from soil. Overwatering concerns do not apply to coco due to its optimal air-to-water ratio. The rule of thumb with coco is to ensure it remains consistently moist.

Sustain Saturation within 90-100%

Coco mixed with perlite possesses the remarkable ability to retain oxygen even when saturated. Consequently, the recommended practice is to maintain coco at a saturation level of 90-100%. This entails frequent watering in small quantities, essentially “topping off” the pots. This process helps flush out excess water and restores the coco to full saturation.

To gauge when to feed again, aim for the point when the media has lost 10% of its water-holding capacity. To estimate this, assume that when coco is fully saturated, water occupies roughly half of the container volume. For example, a 5-gallon container at full saturation contains about 2.5 gallons of water. If the media can accommodate more than one additional quart of water, it’s time for another fertigation. Detailed guidelines for determining the ideal fertigation frequency and volume for your specific grow are available in our tutorial, “How to Water Cannabis Plants in Coco.”

Avoid Coco Drying Out

Some guides erroneously suggest that coco can be managed similarly to soil, with feeding and watering once or twice a week. However, this advice is not applicable when fertigating. Infrequent fertigations deprive the plant of water in two critical ways. Firstly, less water is available because smaller amounts are added. Secondly, infrequent irrigation leads to an increase in EC (electrical conductivity) within the growing medium.

Allowing coco to become dry following fertigation poses significant issues for the plant. The rising salinity as coco dries out is a contributing factor to symptoms like wilting and leaf tip burning, often termed “nutrient burn” or “nute burn.” The plant encounters difficulty in absorbing water via osmosis as the EC levels escalate. This results in signs of water stress, including wilting. Furthermore, the high concentration of ions in the leaves, caused by the elevated salt concentration in the medium, can lead to the common “tip burn.”

Growers are frequently puzzled when their plants exhibit “nutrient burn,” even if the incoming nutrient solution (inflow) is not excessively concentrated. However, the EC of the inflow represents just one element influencing the salinity of the water accessible to the plant. Allowing coco to desiccate will inevitably cause the EC in the root zone to surge to unhealthy levels.

Guideline 4: Run-off Management is Crucial

When you introduce a nutrient solution, you’re essentially adding both salts and water to the growing medium. As the nutrient solution resides in the medium, water is gradually extracted through transpiration and evaporation, leaving behind the salts. Consequently, the EC (electrical conductivity) of the nutrient solution within the medium progressively increases between fertigation events. To effectively control the EC and maintain optimal conditions for plant growth, it is imperative to incorporate run-off water into your irrigation practices.

Run-off Eliminates Excessive Salts

Run-off water serves as a vehicle for removing excess salts, enabling you to uphold a consistent EC in the root zone. You can envision this process as new water replacing and displacing some of the older, saltier water. The salts exhibit a stronger affinity for water than they do for the coco medium. Consequently, the surplus salts readily flush out with the run-off water.

Fertigate with 10-20%

To sustain a uniform root zone EC, it is advisable to fertigate regularly with 10-20% run-off during each irrigation session. When we refer to 20% run-off, we are specifying the volume of water you provide. For instance, in a 5-gallon pot, a typical fertigation quantity might be approximately one quart. Of this quart of water, 10-20% should permeate the medium and drain into the saucer or collection area. If there is no run-off initially, continue adding water to the top until run-off is achieved. Inadequate run-off may lead to salt accumulation, elevating the EC of the nutrient solution in the root zone, potentially resulting in damage to your plants.

Prompt Removal of Run-off

Allowing pots to sit in their run-off water can lead to reabsorption of the water into the potting medium. Since the primary purpose of run-off is salt removal, it is essential to promptly eliminate run-off from the saucer or collection area.

Various methods can be employed for managing run-off. I recommend setting up a run-off system that is convenient for both your plants and you as the grower. Frequent relocation of plants is not ideal for their well-being, and using a shop vacuum to extract water can be labor-intensive, particularly under high-frequency fertigation. Self-draining saucers are an excellent solution for run-off water removal, even for hand-watering scenarios. Regardless of your chosen method, the key is to ensure that run-off water is efficiently removed to maintain a healthy root zone environment.

Guideline 5: EC Management Is Essential

Effectively managing electrical conductivity (EC) is the cornerstone of unleashing the full potential of coco cultivation and achieving optimal harvests. It’s imperative to closely monitor the EC of both the nutrient solution you administer (inflow) and the water that drains through to the saucer beneath each plant (run-off). These EC measurements are vital for maintaining the ideal range for plant growth. However, the most valuable insights are gleaned by observing the disparities between inflow and run-off EC.

Tracking the EC of run-off equips you with early awareness of any salt buildup issues before they negatively impact the plant. When conducting a fertigation, measuring run-off EC closely approximates measuring the EC of the nutrient solution accessible to the plant. Typically, the EC of run-off slightly exceeds that of the nutrient solution inflow. When this differential exists, it signifies that run-off is effectively performing its role. However, if the run-off EC surpasses an acceptable threshold, appropriate corrective measures can be taken. In my tutorial, “Managing EC Using Run-off,” I elaborate on how frequent fertigation and adequate run-off facilitate control over the EC of the nutrient solution available to the plant.

Accurate measurement of electrical conductivity (EC) is absolutely pivotal for effective management of your feeding strategy and nutrient solution concentration. Fortunately, EC measurement technology is relatively straightforward, eliminating the need for costly meters.

By following these guidelines, you can ensure effective feeding practices in your coco grow, leading to improved plant health, vigorous growth, and optimal yields.

Coco Coir Feeding Guide

This coco watering guide explains in detail how to put the principles of frequent feeding into action. It explains:

Feeding Cannabis in Coco

Watering cannabis in coco is a simpler task compared to other growing media, alleviating concerns for many growers who have experience with soil. Coco has its own set of rules for watering, which can be quickly mastered by following a few basic guidelines.

Ensure Complete Saturation

When watering cannabis in coco, it is crucial to fully saturate the entire volume of the coco media. Unlike soil, there is no real risk of over-watering, even during the seedling stage. Properly conditioned coco retains sufficient oxygen for the roots even when saturated.

Saturation is vital to prevent salt accumulation in the media, which can cause harm to your plants. Water passing through the media and becoming run-off helps prevent salt build-up. If the media is not saturated, water will not flow through it, and salts will accumulate.

Water Quantity is Determined by Run-off

The cardinal rule of watering coco is to provide enough nutrient solution to each plant to produce 10-20% run-off. This means that if you add one quart of water, 10-20% of that quart should become run-off. Run-off water plays a crucial role in maintaining a healthy root zone environment. Therefore, it is essential to achieve run-off, regardless of the amount of water required to accomplish this.

When feeding multiple times, a day, the quantity needed to generate run-off should be relatively small. As explained it is ideal to keep the coco between 90 and 100% saturated at all times. Hence, when watering in coco, the coco is already 90% saturated and cannot hold much more. As discussed further below, the recommended water quantity per event is approximately 5% of the volume of the growing container. While this is ideal, the key rule is to always provide enough water to generate adequate run-off from each plant.

Hand-Watering vs. Automatic Watering for Coco Grows

Many growers wonder if high-frequency fertigation is only achievable with an automatic watering system. However, it is possible to reap the benefits of high-frequency fertigation by watering manually once or twice a day. While hand-watering requires a significant commitment, remarkable results can still be attained in coco grows.

Automatic watering systems are preferred as they simplify grow management. They not only make the process more convenient but also allow you to set the optimal frequency and timing for your plants. Contrary to common belief, setting up and operating an automatic watering system is more affordable and easier than many growers think. We provide a comprehensive series of articles and tutorials to guide you through the setup and operation of your own automatic watering system.

The 420 Grow Help Guide to Automatic Watering

Auto Feeding Cannabis

Coco Coir Feeding Frequency

Frequent watering is highly recommended for coco coir. However, continuous application of water through micro drip, wicking, or similar systems should be avoided. It is crucial to apply nutrient solution during watering events that thoroughly saturate the coco coir and produce run-off. After each watering event, an interval is necessary to allow the coco coir to air out. This interval can be as short as 3-4 hours during peak watering needs.

Determining the appropriate watering frequency for coco coir can be done in three main ways:

Look and Feel:

The surface of the coco coir should never be allowed to become dry. If you have experience with growing in soil, it may initially feel like you are over-watering in coco coir. When watering coco coir, it should still retain moisture from the previous watering. If the surface of the coco coir appears dry, it indicates that you should increase the frequency of your watering. The surface should never become so dry that it turns lighter brown in color.

Volume of Water Needed:

Coco coir mixed with perlite achieves an ideal air-to-water ratio when it is saturated between 90% and 100%. This means that once the coco coir has lost around 10% of its water-holding capacity, it is time to water again. Since water makes up approximately half of the total volume of saturated coco coir, the amount of water required for each watering event should be roughly 5% of the container volume.

For example, in a 5-gallon container, it should take approximately 1 quart of water to achieve adequate run-off. This quantity may be smaller than what many growers anticipate. The reason is that the frequency of watering is high, and coco coir is never given an opportunity to fully dry out. Consequently, there is limited capacity for it to hold additional water.

If it takes more than 5% of the container volume to produce run-off, it indicates that the coco coir has become too dry. In such cases, the best course of action is to increase the frequency of watering. In coco coir, it is always better to err on the side of watering too much rather than not enough, as adequate hydration is crucial for optimal plant growth.

Watering coco frequently is best. However, you should not continuously apply water with micro drip, wicking, or other such systems. Nutrient solution should be applied during events which saturate the media and produce run-off. After each event there should be an interval to air-out. The interval can be as little as 3-4 hours during peak needs.

By Monitoring EC:

During the early stages of the grow, determining coco watering frequency is typically based on visual cues, tactile assessment, and volume considerations. However, as the plant establishes itself and experiences rapid growth, it becomes important to also take into account the Electrical Conductivity (EC) of the nutrient solution. Adjusting the watering frequency becomes a valuable tool in maintaining optimal EC levels within the root zone and providing the best possible growing conditions for the plants.

Over time, the EC/PPM (Parts Per Million) of the water will naturally increase as it sits in the pots. When fresh water is added, it lowers the EC/PPM in the pot to match the level of the inflow. Delaying watering for too long can cause the EC/PPM in the pot to reach potentially harmful levels, leading to burn damage on your plants.

In our tutorial titled “Managing EC Using Run-off“, I provide a detailed explanation of how to utilize EC/PPM measurements to effectively manage your watering or fertigation strategy. This resource will guide you in leveraging EC/PPM monitoring as a tool to ensure optimal watering practices, contributing to the overall health and success of your grow.

Start with Once or Twice DAILY Watering in Coco:

Begin with Daily Watering in Coco:

It is crucial to water cannabis in coco at least once per day. Therefore, it is essential to ensure that your plants are placed in appropriately sized containers. To initiate the growth process, I recommend starting plants in pint-sized containers. Initially, watering once a day is sufficient, but as the plants remain in fabric seedling pots, the frequency should be increased too twice daily. Seedlings in larger containers or plastic seedling pots should still be watered once daily until they grow larger. For detailed instructions on transplanting cannabis plants, please refer to our tutorial titled “The Importance of Transplanting Cannabis Plants.”

Fertigation during this early stage can be challenging because the plant cannot tolerate high EC/PPM water, yet the coco coir requires a significant dose of CalMag. High-frequency fertigation offers a solution by allowing the delivery of a larger cumulative dose of calcium (Ca) and magnesium (Mg) to the coco coir without causing plant burn due to high EC levels. To gain a comprehensive understanding of watering techniques during the seedling stage, I recommend reading our detailed guide titled “A Step-by-Step Guide to Growing Cannabis From Seed.” This resource provides step-by-step guidance on watering practices tailored specifically for seedlings in coco coir.

Adjust Watering Frequency as Plants Mature

During the transplant phase until plants are placed in their final containers, it is generally recommended to water cannabis plants in coco twice daily. Once the plants are in their final containers, watering frequency should be modified based on various factors as discussed earlier. Particularly during the flowering stage, the water requirements of the plants increase, necessitating a corresponding adjustment in coco watering frequency.

Determining the appropriate watering frequency depends on factors such as plant size, container size, climate, lighting conditions, and relative humidity. Ideally, during the flowering period, it is advisable to aim for a coco watering frequency of 3-5 times per day. In coco, achieving the best outcomes often involves using smaller containers with more frequent watering. While watering 3-5 times per day may seem like a substantial amount, the individual amounts required at each watering event are actually quite small due to the high frequency.

It’s worth noting that maintaining a watering frequency of 3-5 times per day is primarily feasible with an automatic watering system. If you are hand-watering, you will likely be limited to watering twice daily. In such cases, compensating for the reduced frequency can be achieved by using larger final containers. For a more detailed explanation, please refer to our tutorial titled “The Importance of Transplanting Cannabis Plants”.

Coco Coir Watering Schedule:

The timing for feedings is dependent and the stage of growth you are in. This is because you should only water your cannabis plants when the lights are on. In the vegetive stage lights are on between 18 and 24 hours. We feed three times a day in the veg stage every six hours. In the flowering stage the lights are on for 12 hours and we feed six times a day. In flower we feed every two hours.

Light Cycles and Coco Watering Schedule:

So, your coco watering schedule depends on the light schedule that you are using. In the cannabis community, light timing is expressed as a fraction with “Lights on” time over “Lights off” time.

  • 24/0: Lights are on 24 hours and off 0 hours
  • 18/6: Lights are on 18 hours and off 6 hours
  • 12/12: Lights are on 12 hours and off 12 hours. 12/12 timing is used during the flowering period with Photoperiod plants.

Handling Run-Off in Coco Watering

One of the fundamental rules when watering cannabis in coco is to ensure that there is run-off each time you water. Run-off water plays a crucial role in preventing salt accumulation in the coco coir. Consequently, it is important to promptly remove the run-off water. Additionally, periodically measuring the EC/PPM of the run-off water is essential. In this section of the coco watering guide, we will outline what actions you should take with the run-off water.

Promptly Remove Run-Off

When run-off water starts to emerge from the bottom of the pots, it is crucial to remove it as quickly as possible. Having a well-thought-out strategy for run-off water removal from the saucers is important. As discussed, it is advisable to utilize plant elevators, which elevate the pots within the saucer. This prevents the re-absorption of run-off water and promotes better drainage and airflow. To effectively remove wastewater from the saucers, we highly recommend elevating them and installing drain lines.

By implementing these techniques, you can ensure efficient removal of run-off water, maintaining a healthy growing environment for your plants while also facilitating ease of management for you as the grower.

Monitoring the EC of the Run-off

Measuring and effectively responding to the EC of the run-off water is a crucial aspect of managing your grow with expertise. If you haven’t already, it is recommended to acquire a user-friendly water quality tester. These meters simplify the process of measuring the EC/PPM of both the nutrient solution you provide and the run-off water. To gain a comprehensive understanding of how to interpret and respond to run-off EC readings, we invite you to read our tutorial titled “Managing EC Using Run-off” This resource will provide you with valuable insights on utilizing run-off EC data to make informed decisions and optimize your fertigation practices.

A Truncheon Pole to Measure EC/PPM is Essential

Measuring Electrical Conductivity

Accurately measuring Electrical Conductivity (EC) plays a vital role in effectively managing your fertigation strategy and maintaining the appropriate strength of your nutrient solution. The technology used for measuring EC is relatively straightforward, which means you don’t have to spend a fortune on an expensive meter.

BlueLabs Truncheon Pole

I have personally used and relied on the BlueLabs Truncheon Pole for my own growing endeavors. Its accuracy has been confirmed through comparisons with other meters, and it has consistently performed exceptionally well for me over the course my growing career. It is worth noting that these meters do not feature temperature calibration. To obtain accurate readings, it is advisable to measure the water at a temperature similar to that at which it will be applied to the plants, typically around 68°F/20°C. The BlueLabs Truncheon Pole is pricey, but I have found it worth the expense. If you don’t want to make this investment just yet below are links to a less expensive EC meter.

Bluelab TRUNCOMV2 Commercial Truncheon Nutrient Meter with Increased Measurement Range, Digital Conductivity (TDS, EC, ppm 500, ppm 700, CF) Tester in Water, Tool for Hydroponic System and Plant Grow

HoneForest EC Meter

To achieve high accuracy, the TDS water tester is equipped with a premium quality titanium alloy probe, and an efficient intelligent chip that not only ensures stable performance but also contributes to exceptional accuracy, making it a trustworthy water quality tester.

HoneForest Water Quality Tester, Accurate and Reliable, TDS Meter, EC Meter & Temperature Meter 3 in 1, 0-9990ppm, Ideal Water Test Meter for Drinking Water, Aquariums, etc.

420 Grow Help’s Guide to Feed and Water Cannabis in Coco

This article is part two of 420GrowHelp’s Guide to Feeding and Watering Cannabis in Coco. Read the complete series!

Set-up Your Grow

Growing Cannabis

Want to Receive our weekly Newsletter full of Grow Tips, News and Exclusive Content? Subscribe Below!

About Our Product Recommendations

Here at 420 Grow Help, our primary goal is to assist growers in achieving the utmost success with their cannabis crops by providing accurate scientific information and sharing proven cultivation techniques. The products we recommend are the very ones we have personally chosen to purchase and use ourselves. We maintain a strict policy of not accepting sponsorships or advertising, and we only endorse products that meet our own high standards. For detailed product recommendations, please refer to our Product and Equipment Guide.

Please note that when you make a purchase through the links we provide, we may receive a referral fee. This is the primary source of revenue that supports and sustains 420 Grow Help. By clicking through our links and making purchases, you are directly contributing to our ongoing work. As an Amazon Associate, we earn from qualifying purchases.

Disclaimer:

The information presented on 420GrowHelp.com should not be regarded as financial, legal, or medical advice. It is your responsibility to familiarize yourself with and abide by the local laws and regulations pertaining to the cultivation, possession, and use of cannabis. Decisions regarding cannabis cultivation should be made in consultation with a lawyer or qualified legal advisor, while decisions regarding cannabis use should be made in consultation with a doctor or medical professional.

Set-up Your Grow

Growing Cannabis

Want to Receive our weekly Newsletter full of Grow Tips, News and Exclusive Content? Subscribe Below!

About Our Product Recommendations

Here at 420 Grow Help, our primary goal is to assist growers in achieving the utmost success with their cannabis crops by providing accurate scientific information and sharing proven cultivation techniques. The products we recommend are the very ones we have personally chosen to purchase and use ourselves. We maintain a strict policy of not accepting sponsorships or advertising, and we only endorse products that meet our own high standards. For detailed product recommendations, please refer to our Product and Equipment Guide.

Please note that when you make a purchase through the links we provide, we may receive a referral fee. This is the primary source of revenue that supports and sustains 420 Grow Help. By clicking through our links and making purchases, you are directly contributing to our ongoing work. As an Amazon Associate, we earn from qualifying purchases.

Disclaimer:

The information presented on 420GrowHelp.com should not be regarded as financial, legal, or medical advice. It is your responsibility to familiarize yourself with and abide by the local laws and regulations pertaining to the cultivation, possession, and use of cannabis. Decisions regarding cannabis cultivation should be made in consultation with a lawyer or qualified legal advisor, while decisions regarding cannabis use should be made in consultation with a doctor or medical professional.

Similar Posts